AlgoClear / MossGo 5l - removes moss, algae, and slime. Concentrate

AlgoClear - it is a concentrate that removes the biological layer from all hard surfaces. It is an aqueous solution of quaternary ammonium. It is fully biodegradable - it does not leave permanent traces in the environment.

For dilution with water in various proportions - see: table at the bottom of the page.

The AlgoClear agent can be applied in many ways, for example, by spraying with a sprayer, using a watering can with a water-dispersing nozzle, or with a brush to avoid damaging the vegetation in close proximity. Best applied to a dry surface.

Apply diluted AlgoClear in an amount of 1 liter per approximately 2-8 m² of surface area.
The action of AlgoClear may be nullified by atmospheric precipitation within 12 hours of application or by temperatures dropping below 8°C.
For use on all hard surfaces prone to the growth of mosses, algae, and lichens.
It is not suitable as a herbicide for lawns, flower beds, and ponds. Toxic to aquatic organisms.

_________________________________________________

AlgoClear is used on surfaces such as:

Roof tiles - removes lichens, discolorations, moss remnants.

Facades (brick, walls, plasters, concrete tiles) - removes red algae, green algae, black spots.

Paving stones - removes black efflorescence from paving stones. Application once a year will ensure that the stone remains resistant to further contamination.

Artificial grass - before application, it is necessary to remove biomass from the surface as much as possible, especially moss.

Polyurethane (tartan) - removes greasy stains, brown discolorations, algae, and moss residues

Polyethylene

UPVC (unplasticized polyvinyl chloride)

Wood and carpentry - AlgoClear has wood-preserving properties. Regular treatments reduce the wood's need for staining and oiling.

Metal

Glass - just moisten the surface with the diluted solution and leave it for a few minutes. The layer of dirt should easily disappear after wiping.

Stone - algae and contaminants on the stone will die within a few minutes and self-cleaning will occur. Black deposits (fungi) will die within a few hours. A black coating formed by the fungi to protect them will remain on the stone structure. To remove it, one must wait for its natural decomposition in sunny areas.

Asphalt, concrete - removes greasy marks, algae, moss residues, brown discolorations.

Plastic tunnels - remove grease and biological contaminants.
 

AlgoClear works at 99.9%. It interrupts the reproductive cycles of organisms in a short time.

AlgoClear is safe on all external hard surfaces, such as:

♦ walls (plaster, brick, stone, cladding),

♦ driveways,

♦ wooden shelters and fences, decked terraces,

♦ foil tunnels and greenhouses,

♦ polycarbonate greenhouses,

♦ stables,

♦ tennis courts,

♦ playground equipment for children (sandboxes, slides, playhouses, swings, seesaws, etc.)

AlgoClear does not require rinsing. After application, it should be left to self-clean.

  AlgoClear dosing and proportions - table   

The data contained in the table are for reference only and may vary depending on many factors, such as surface absorbency, ambient temperature, method of application, level of surface contamination, or degree of moss growth. It is therefore worth considering these variables and following recommendations tailored to specific environmental conditions.